Kia Niro: Smart cruise control system / To adjust the sensitivity of smart cruise control
The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted. Go to the User Settings Mode and select the Driving Assist and select SCC (smart cruise control) and select the Response.You may select one of the three stages you prefer.
- Slow:
Vehicle speed following the front vehicle to maintain the set distance is slower than normal speed. - Normal:
Vehicle speed following the front vehicle to maintain the set distance is normal - Fast:
Vehicle speed following the front vehicle to maintain the set distance is faster than normal speed.
✽ NOTICE
The last selected mode is remained in the system
SCC (smart cruise control) malfunction message
The message (“Check Smart Cruise Control System”) will appear when the vehicle
to vehicle distance control system is not functioning normally.
We recommend have the system checked by an authori ...
To convert to cruise control mode
“Smart Cruise Control or Cruise Control”
The driver may choose to only use the cruise control mode (speed control function)
by doing as follows:
1. Turn the smart cruise control system on (the ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: CVVT Oil Control Valve (OCV) Repair procedures
Inspection
1.
Switch "OFF" the ignition.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and 2.
4.
Check that the resistance is within the specificat ...
Kia Niro (DE HEV) Owners Manual: Regenerative Brake Warning Light
This warning light illuminates :
When the regenerative brake does not operate and the brake does not perform well.
This causes the Brake Warning light (red) and Regenerative Brake Warning Light (yellow)
to illuminate simultaneously.
In this case, drive safely and we recommend that you have y ...
