Kia Niro: Vehicle to vehicle distance setting / SCC (smart cruise control) malfunction message
The message (“Check Smart Cruise Control System”) will appear when the vehicle to vehicle distance control system is not functioning normally.
We recommend have the system checked by an authorized Kia dealer.
CAUTION
- Do not install accessories around the sensor and do not replace the bumper by yourself. It may interfere with the sensor performance.
- Always keep the sensor and bumper clean.
- To prevent sensor cover damage from occurring, wash the car with a soft cloth.
- Do not damage the sensor or sensor area by a strong impact. If the sensor moves slightly off position, the smart cruise control system will not operate correctly without any warning or indicator from the cluster. If this occurs, we recommend that the system be checked by an authorized Kia dealer.
- Use only a genuine Kia sensor cover for your vehicle. Do not paint anything on the sensor cover.
Radar check message
If the radar or cover is dirty or obscured with foreign matter such as snow,
this message (“Smart Cruise Control disabled temporarily”) will appear and it will
disappear after for a while. In ...
To adjust the sensitivity of smart cruise control
The sensitivity of vehicle speed when following the front vehicle to maintain
the set distance can be adjusted. Go to the User Settings Mode and select the Driving
Assist and select SCC (smart cru ...
Other information:
Kia Niro (DE HEV) Owners Manual: Voice Recognition
✽ NOTICE - Using the Voice Recognition
Voice recognition is a safety technology that recognizes user voice commands
and executes multimedia functions during driving.
Unfortunately, due to technical limitations, the system is unable to
recognize all voice commands. To address these limi ...
Kia Niro 2017 (DE HEV) Service Manual: Rear Bumper beam Assembly Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pie ...
