Kia Niro: Smart cruise control system / To convert to cruise control mode
“Smart Cruise Control or Cruise Control”
The driver may choose to only use the cruise control mode (speed control function) by doing as follows:
1. Turn the smart cruise control system on (the cruise indicator light will be on but the system will not be activated).
2. Push the distance to distance switch for more than 2 seconds.
3. Choose between "smart cruise control (SCC) mode" and "Cruise control (CC) mode".
WARNING
When using the cruise control mode, you must manually access the distance to other vehicles as the system will not automatically brake to slow down for other vehicles.
To adjust the sensitivity of smart cruise control
The sensitivity of vehicle speed when following the front vehicle to maintain
the set distance can be adjusted. Go to the User Settings Mode and select the Driving
Assist and select SCC (smart cru ...
Limitations of the system
The smart cruise control system may have limits to its ability to detect distance
to the vehicle ahead due to road and traffic conditions. ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Stop Lamp Switch Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Remove the knee air bag.
(Refer to Restrain ...
Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Engine Overheat Troubleshooting
Inspection
Remedy
Visual inspection
Inspect for shortage of coolant in reservoir tank .
Reinspect after replenishing coolant.
Inspect for coolant pollution after remo ...
