Kia Niro: Driving your vehicle / Lane Keeping Assist System (LKAS)
The Lane Keeping Assist System detects lane markers on the road, and assists
the driver’s steering to help keep the vehicle between lanes.
When the system detects the vehicle straying from its lane, it alerts the driver
with a visual and audible warning, while applying a slight countersteering torque,
trying to prevent the vehicle from moving out of its lane.
WARNING
- The steering wheel is not continuously controlled so if the vehicle speed
is very fast when leaving a lane the vehicle may not be controlled by the system.
- It is the responsibility of the driver to drive safely.
- Do not steer the steering wheel suddenly when the steering wheel is being
assisted by the system.
- LKAS prevents the driver from moving out of the lane unintentionally
by assisting the driver's steering. However, the driver should not solely rely
on the system but always pay attention on the steering wheel to stay in the
lane.
- Always check the road condition and surroundings and be cautious when
the system cancels, does not operate or malfunctions.
- Do not place any accessories, stickers or tint the windshield near the
rearview mirror.
- The system detects lane markers and controls the steering wheel by a
camera, therefore, if the lane markers are hard to detect, the system may not
work properly. Please refer to "Driver's Attention".
- Do not remove any LKAS parts or apply impact.
- Do not place objects on the dashboard that reflects light such as mirrors,
white paper, etc. The system may malfunction if the sunlight is reflected.
- Loud audio sounds may interfere with the passenger from hearing warning
chimes.
- Always have your hands on the steering wheel while the LKAS system is
activated. If you continue to drive with your hands off the steering wheel after
the "Hand on" warning, the system will turn off automatically.
- If you drive very fast, the vehicle may stray out of the lane. Always
be cautious when using the system.
- When you tow the trailer, make sure that you turn off LKAS function.
Press the CRUISE & SPEED LIMIT MODE switch.
Turn the ignition off.
If you press the cancel O switch once, the set speed limit will cancel, but it
will not turn the system off. If you w ...
To turn on the LKAS, push the button with the ignition switch in the ON
position.
The LKAS indicator (green) will illuminate.
To turn off the system, press the button again. The indicator ...