Kia Niro: Lane Keeping Assist System (LKAS) / LKAS function change
The driver can change LKAS to Lane Departure Warning System (LDWS) or change the LKAS mode between Standard LKA and Active LKA from the User Settings Mode on the LCD display. The driver can choose them by placing the ignition switch to the ON position and by selecting ‘User Settings’, ‘Driving Assist’, and ‘Lane Keeping Assist System’.
The system is automatically set to Standard LKA.
LKAS fail indicator
■ Type A
■ Type B
The LKAS fail indicator (yellow) will illuminate with an audible warning if the
LKAS is not working properly.We recommend that you contact an authorized Kia dealer.
When ...
Lane Departure Warning system (LDWS)
The system can be converted to LKA to LDW at the User setting mode.
Refer to User setting in section 4.
LDWS alerts the driver with a visual and audible warning when the system
detects the v ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Fuel Filler Door Open Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad lower switch (A) after loosening the mounting ...
Kia Niro 2017 (DE HEV) Service Manual: Power Relay Assembly (PRA) Description and operation
Description
The Power Relay Assembly (PRA) consists of the positive and negative main relays,
pre-charge relay, pre-charge resistor and battery current sensor. It is located
inside the battery pack assembly and controls the high voltage power circuit between
the high voltage batte ...
