Removal |
1. |
Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") |
2. |
Disconnect the fuel pump motor connector (A) and fuel sender connector (B).
|
3. |
Lift the fixing hook (A) by using a common driver, and then remove the fuel sender (B).
|
4. |
Remove the fixing clip (A), and then disconnect the feed tube (B).
|
5. |
Remove the head assembly (B) after releasing the cushion fixing clip (A).
|
6. |
Remove the reservoir-cup (B) after releasing the fixing hook (A).
|
7. |
Disconnect the ground line (A). |
8. |
Disconnect the fuel pump motor connector (B).
|
9. |
Remove the fuel pressure regulator (B) after releasing the fixing hook (A).
|
10. |
Remove the pre-filter (B) after releasing the fixing hooks (A).
|
11. |
Remove the fuel pump motor (A) from the fuel filter by pulling it downward.
|
12. |
Remove the fuel filter after releasing the fixing hooks (A).
|
Installtion |
1. |
Install in the reverse order of removal. |
Kia Niro 2017 (DE HEV) Service Manual: Mass Air Flow Sensor (MAFS) Repair procedures
Inspection
1.
Visually check the MAFS for the following:
–
Correct mounting direction
–
Any contamination, corrosion or damage on connector
–
Clogged or we ...
Kia Niro 2017 (DE HEV) Service Manual: Drive Belt Repair procedures
Removal
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
Remove the drive belt.
(1)
Using the wrench, turning the mechanical tensioner (A) c ...