Kia Niro: Cooling System / Cooling Fan Specifications

Kia Niro 2017 (DE HEV) Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Specifications

Specifications

Item	Specification
Fan type	Puller
Fan speed control	PWM
Air flow rate [㎥/h]	2,150 - 8% min.
Fan speed (rpm)	2,000 ± 8%
Current (A)	23.3 + 10% max.

Cooling Fan Description and operation

Description Controls the cooling fan motor voltage depending on the duty output from the ECU (Freq.: 300Hz). [Signal from the ECU to the PWM (SI: 300Hz)] ...

Cooling Fan Schematic diagrams

Circuit Diagram PWM Circuit Diagram ...

Other information:

Kia Niro (DE HEV) Owners Manual: Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than 1.6 km (one mile). Recommended pressures must be maintained for the best ride, top vehicle handling, and mini ...

Kia Niro 2017 (DE HEV) Service Manual: External AMP Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad center lower panel. (Refer to Body - "Crash Pad Center Panel") 3. Disconnect the external amplifier connectors (A). ...