Kia Niro: Cooling System / Cooling Fan Description and operation
| Description |
Controls the cooling fan motor voltage depending on the duty output from the ECU (Freq.: 300Hz).
[Signal from the ECU to the PWM (SI: 300Hz)]
Cooling Fan Components and components location
Components
1. Cooling fan
2. Cooling fan motor
3. Cooling fan shroud
4. Air dam
5. Cooling fan controller (PWM)
...
Cooling Fan Specifications
Specifications
Item
Specification
Fan type
Puller
Fan speed control
PWM
Air flow rat ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
BSD is a system that uses two magnetic wave radar sensors attached on the rear
panel to measure the distance from the vehicle in the back and senses and sets off
(visual and auditory) alarms for any vehicle coming into the blind spot.
–
Blind Spot ...
Kia Niro 2017 (DE HEV) Service Manual: DCT Control Module (TCM) Repair procedures
Inspection
1.
TCM ground circuit test : Measure the resistance between TCM and chassis
ground. (Inspect the terminal connected to the chassis ground with the back
of harness connector as the inspection point of TCM side.)
Specification : Below ...
