Kia Niro: System operation / Heating
1. Set the mode to the 
position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If dehumidified heating is desired, turn the air conditioning system (if equipped) on.
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desi ...
Operation Tips
To keep dust or unpleasant fumes from entering the vehicle through the ventilation
system, temporarily set the air intake control to the recirculated air position.
Be sure to return the contr ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Injector Troubleshooting
Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The top waveform
is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform
is from the low side (ground side) of the #1 injector and the bottom waveform is
from the low ...
Kia Niro 2017 (DE HEV) Service Manual: Rear Washer Switch Repair procedures
Inspection
Multifunction Switch
Inspection
1.
Check for continuity between the terminals in each switch position as
shown below.
[Left Handle
Drive]
Switch
Switch position
Switch terminal
...
