Kia Niro: Engine Control System / Variable Force Solenoid (VFS) Schematic diagrams
| Circuit Diagram |
Harness Connector
Variable Force Solenoid (VFS) Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is calc ...
Variable Force Solenoid (VFS) Repair procedures
Removal
1.
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
2.
Disconnect the VFS connector (A).
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Description and operation
Description
Installed on top of the low pressure fuel pump, the Fuel Pressure Sensor (FPS)
measures the pressure in the low pressure fuel line.
Based on the fuel pressure measured by the FPS and the amount of fuel consumed,
the fuel pump control module (FPCM) determines whether to ...
Kia Niro 2017 (DE HEV) Service Manual: Safety Plug Description and operation
Description
Safety Plug is installed on the rear side of the high voltage battery and it
can mechanically shut the high voltage circuit off when servicing the high voltage
system (i.e. High Voltage Battery, Power Relay Assembly, HPCU, BMS ECU, Hybrid Drive
Motor, Inverter, HSG, LD ...
