Kia Niro: Vehicle to vehicle distance setting / To set vehicle to vehicle distance

This function allows you to program the vehicle to maintain relative distance to the vehicle ahead without depressing the accelerator pedal or brake pedal.

The vehicle to vehicle distance will automatically activate when the smart cruise control system is on.

Select the appropriate distance according to road conditions and vehicle speed.

Each time the button is pressed, the vehicle to vehicle distance changes as follows:

For example, if you drive at 90 km/h (56 mph), the distance maintain as follows;

Distance 4 - approximately 52.5 m
Distance 3 - approximately 40 m
Distance 2 - approximately 32.5 m
Distance 1 - approximately 25 m

✽ NOTICE

The level of distance between vehicles will be set to the level designated by the driver. (Last mode save feature)

✽ NOTICE

The 'Distance 4' is always set when the system is used for the first time after starting the engine.

The smart cruise control system remember the last vehicle to vehicle distance which the driver used in the vehicle with AEB.

Distance 4

Distance 3

Distance 2

Distance 1

CAUTION

CAUTION

If the vehicle ahead (vehicle speed: less than 30km/h) disappears to the next lane, the warning chime will sound and a message will appear. Adjust your vehicle speed for vehicles or objects that can suddenly appear in front of you by depressing the brake pedal according to the road condition ahead and driving condition.

Vehicle to vehicle distance setting
...

Radar to detect distance to the vehicle ahead
The sensor detects the distance to the vehicle ahead. If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle distance control may not operate correctly. Always keep t ...

Other information:

Kia Niro (DE HEV) Owners Manual: Rear window wiper blade
1. Raise the wiper arm and pull out the wiper blade assembly. 2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place. 3. Make sure the blade assembly is installed firmly by trying to pull it slightly. To prevent damage to the ...

Kia Niro 2017 (DE HEV) Service Manual: Reservoir Tank Repair procedures
Removal and Installation 1. Drain the coolant. (Refer to Cooling System - "Coolant") 2. Disconnect the radiator reservoir hose (A). 3. Disconnect the reservoir hose (B). 4. Remove ...

© 2016-2024 www.kniro.net