Kia Niro: Smart cruise control system / To convert to cruise control mode

“Smart Cruise Control or Cruise Control”

The driver may choose to only use the cruise control mode (speed control function) by doing as follows:

1. Turn the smart cruise control system on (the cruise indicator light will be on but the system will not be activated).

2. Push the distance to distance switch for more than 2 seconds.

3. Choose between "smart cruise control (SCC) mode" and "Cruise control (CC) mode".

WARNING

When using the cruise control mode, you must manually access the distance to other vehicles as the system will not automatically brake to slow down for other vehicles.

To adjust the sensitivity of smart cruise control
The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted. Go to the User Settings Mode and select the Driving Assist and select SCC (smart cru ...

Limitations of the system
The smart cruise control system may have limits to its ability to detect distance to the vehicle ahead due to road and traffic conditions. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Engine Clutch Actuator Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery (-) terminal. 2. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 3. Disconnect the engine clutch ...

Kia Niro 2017 (DE HEV) Service Manual: Gear Actuator Assembly Components and components location
Component Location 1. Gear actuator assembly 2. Shift motor 2 (Even) 3. Shift motor 1 (Odd) 4. Select solenoid 2 (Even) 5. Select solenoid 1 (Odd) ...

© 2016-2025 www.kniro.net