Kia Niro: Chassis / Tire (pressure & tread wear) Repair procedures
| Inspection |
| 1. |
Check the tire pressure. 16(inch) : 230 kPa (33 psi) 18(inch) : 230 kPa (33 psi) |
Tire Rotation
Checking For Pull And Wander
If the steering pulls to one side, rotate the tires according to the following wheel rotation procedure.
| 1. |
Rotate the front right and front left tires, and perform a road test in order to confirm vehicle stability.
|
| 2. |
If the steering pulls to the opposite side, rotate the front and rear tires, and perform a road test again.
|
| 3. |
If the steering continues to pull to one side, rotate the front right and left tires again, and perform a road test.
|
| 4. |
If the steering continues to pull to the opposite side, replace the front wheels with new ones.
|
Tire Wear
|
| 1. |
Measure the tread depth of the tires.
|
| 2. |
If the remaining tread depth (A) is less than the limit, replace the tire.
|
Suspension Mounting Bolts Repair procedures
Inspection
Visually check the loose mount bolt. ...
Body
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Hybrid Control Unit (HCU) Schematic diagrams
HCU Terminal And Input/Output
Signal
Terminal Function
Connector [C133-S]
Pin No.
Description
Connected to
1
HCU ground
Chassis ground
2
HCU ground
...
Kia Niro (DE HEV) Owners Manual: Removing and storing the spare tire
Turn the tire hold-down wing bolt counterclockwise.
Store the tire in the reverse order of removal.
To prevent the spare tire and tools from “rattling” while the vehicle is in motion,
store them properly.
If it is hard to loosen the tire holddown wing bolt by hand, you can loosen it
e ...
