Kia Niro: Tailgate / Tailgate Latch Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the tailgate trim.

(Refer to Tailgate - " Tailgate Trim")

2.

Disconnect the tailgate latch connector (A).

3.

Remove the tailgate latch assembly (B) after loosening the mounting bolts (A).

Tightening torque :

10.8 - 11.8 N·m (1.1 - 1.2 kgf·m, 8.0 - 8.7 lb·ft)

4.

Install in the reverse order of removal.

  

Make sure that the tailgate locks/unlocks and opens/closes properly.

Adjust the tailgate alignment.

Make sure the connectors are connected in properly.

Tailgate Latch Components and components location
Component Location 1. Tailgate latch assembly ...

Tailgate Lift Repair procedures
Replacement    Be careful as the tailgate may fall down on people when the lifts are removed. Have a helper hold the ...

Other information:

Kia Niro (DE HEV) Owners Manual: Using the TMK
1. Detach the speed restriction label (1) from the sealant bottle (2), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast. ■ 18 inch tire 2. Screw connection hose (10) onto the connector of the sealant bottle. ...

Kia Niro 2017 (DE HEV) Service Manual: General information
General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, cleanliness and tight connections. (Refer to Engine Electrical ...

© 2016-2024 www.kniro.net