The SRS consists of the following components:
1. Driver's front air bag module
2. Passenger's front air bag module*
3. Side air bag modules*
4. Curtain air bag modules*
5. Retractor pre-tensioner assemblies*
6. Air bag warning light
7. SRS control module (SRSCM)
8. Front impact sensors
9. Side impact sensors*
10. Side pressure sensors*
11. Passenger’s front air bag ON/OFF indicator (front passenger's seat only)*
12. Passenger’s front air bag ON/OFF switch*
13. Retractor pre-tensioner assemblies*
The SRSCM continually monitors all SRS components while the ignition switch is ON to determine if a crash impact is severe enough to require air bag deployment or pre-tensioner seat belt deployment.
The SRS air bag warning light on the instrument panel will illuminate for about 6 seconds after the ignition switch is turned to the ON position, after which the SRS air bag warning light should go out.
WARNING
If any of the following conditions occurs, this indicates a malfunction of the SRS.We recommend that the system be inspected by an authorized Kia dealer.
Driver’s front air bag (1)
The front air bag modules are located both in the center of the steering wheel and in the front passenger's panel above the glove box. When the SRSCM detects a sufficiently severe impact to the front of the vehicle, it will automatically deploy the front air bags.
Driver’s front air bag (2)
Upon deployment, tear seams molded directly into the pad covers will separate under pressure from the expansion of the air bags. Further opening of the covers then allows full inflation of the air bags.
Driver’s front air bag (3)
A fully inflated air bag, in combination with a properly worn seat belt, slows the driver's or the passenger's forward motion, reducing the risk of head and chest injury.
After complete inflation, the air bag immediately starts deflating, enabling the driver to maintain forward visibility and the ability to steer or operate other controls.
Passenger’s front air bag (if equipped)
WARNING
WARNING
Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components Location
1. PCV Valve
2. Canister
3. Purge control solenoid valve (PCSV)
4. Fuel Tank Air Filter
5. Catalytic converter (WCC+UCC)
1. PCV Valve
2. Canister
...
Kia Niro 2017 (DE HEV) Service Manual: Variable Force Solenoid (VFS) Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is calculated by the engine speed and load. By controlling CVVT, the valve
overlap or underlap occurs, wh ...