Kia Niro: Hybrid Motor System / Specifications
| Specifications |
Hybrid Drive Motor
|
Item |
Specification |
|
Type |
PMSM (Interior Permanent Magnet Synchronous Motor) |
|
Max. output |
32 kW / 1,798 - 2,500 rpm |
|
Max. torque |
170 N·m / 0 - 1,798 rpm |
|
Cooling system |
Water-cooled |
Hybrid Starter Generator (HSG)
|
Item |
Specification |
|
Type |
PMSM (Interior Permanent Magnet Synchronous Motor) |
|
Max. output |
8.0 kW / 2,160 - 12,000 rpm |
|
Max. torque |
35.3 N·m / 0 - 2,160 rpm |
|
Cooling system |
Water-cooled |
Electric Water Pump (EWP)
|
Item |
Specification |
|
Type |
Water pump |
|
Operation |
Motor drive |
|
Voltage |
12 V |
|
Rated currency |
Below 2.8 A |
Coolant
|
Item |
Specification |
|
Capacity |
2.8 L (0.74 U.S gal., 2.96 U.S.qt., 2.46 Imp.qt.) |
| Tightening Torques |
|
Item |
N·m |
kgf·m
|
lb·ft
|
|
HPCU mounting bolt |
21.6 - 23.5 |
2.2 - 2.4 |
15.9 - 17.4 |
|
DCT ↔ Hybrid drive motor mounting bolt |
42.2 - 53.9 |
4.3 - 5.5 |
31.1 - 39.8 |
|
Engine clutch actuator mounting bolt |
21.6 - 26.5 |
2.2 - 2.7 |
15.9 - 19.5 |
|
EWP mounting bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
|
HSG mounting bolt |
44.1 - 49.0 |
4.5 - 5.0 |
32.5 - 36.2 |
|
55.9 - 60.8 |
5.7 - 6.2 |
41.2 - 44.8 |
|
|
Reservoir mounting bolt |
7.8 - 11.8 |
0.8 - 1.2 |
5.8 - 8.7 |
|
Radiator mounting bolt |
7.8 - 11.8 |
0.8 - 1.2 |
5.8 - 8.7 |
High voltage shut-off procedures
High Voltage Shut-off Procedures
•
Be sure to read and follow the “General Safety Informat ...
Special service tools
Special Service Tools
Tool Name / Number
Illustration
Description
Pressure cap pressure checker
0K253-G5100
...
Other information:
Kia Niro (DE HEV) Owners Manual: Head lamp low beam (LHD)
1. Turn the low beam on without driver aboard.
2. The cut-off line should be projected in the cut-off line shown in the picture.
3. When aiming the low beam, vertical aiming should be adjusted after adjusting
the horizontal aiming.
4. If head lamp leveling device is equipped, adjust the head la ...
Kia Niro 2017 (DE HEV) Service Manual: Tire (pressure & tread wear) Repair procedures
Inspection
1.
Check the tire pressure.
16(inch) : 230 kPa (33 psi)
18(inch) : 230 kPa (33 psi)
Tire Rotation
Checking For Pull And
Wander
If the steering pulls to one side, rotate the tires according to the following
wheel rotation procedure.
...
