Specifications |
[Clutch Cover and Disc]
Items |
Specifications |
|
Clutch operation method |
Hydraulic motor type |
|
Clutch cover |
Type |
Diaphragm spring strap |
Clutch disc |
Type |
Single dry with diaphragm |
Facing diameter (Outer × inner) |
Ø225 × Ø175mm (Ø8.8582 × Ø6.8897 in.) |
|
Clutch disc thickness [When free] |
(Ø8.8582 × Ø6.8897 in.) |
[Engine Clutch Actuator]
Items |
Specifications |
Operation method |
BLDC Motor |
Input voltage (V) |
12 |
Max power (W) |
480 |
Operating temperature (°C) |
- 30 to 105 °C |
Resistance (Ω) |
120 |
Service Standard
Items |
Specifications |
Clutch disc rivet depth |
0.3 mm (0.0118 in.) less than |
Tightening Torques
Item |
N·m |
kgf·m |
lb·ft |
Clutch cover assembly mounting bolt |
11.8 - 14.7 |
1.2 - 1.5 |
8.7 - 10.8 |
Engine clutch actuator mounting bolt |
21.6 - 26.5 |
2.2 - 2.7 |
15.9 - 19.5 |
Concentric slave cylinder mounting bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
Hydraulic pipe bracket mounting bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
Reservoir mounting bolt |
3.9 - 5.9 |
0.4 - 0.6 |
2.9 - 4.3 |
Lubricants |
Item |
Specified lubricants |
Quantity |
Hybrid motor input shaft spline side |
CASMOLY L9508 |
0.2g |
Engine clutch actuator reservoir |
Brake fluid DOT3 |
Remove air from the hydraulic line and then inject hydraulic fluid to the
reservoir so that it comes between the MAX and MIN levels of the reservoir.
|
Kia Niro 2017 (DE HEV) Service Manual: Dual Clutch Assembly Repair procedures
Removal
1.
Remove the hybrid drive motor & dual clutch transmission assembly from
the vehicle.
(Refer to DCT System - "DCT")
2.
Remove the hybrid drive motor assembly from the DCT assembly.
(Refer to Hybrid Motor System ...
Kia Niro 2017 (DE HEV) Service Manual: Hybrid Power Control Unit (HPCU) Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...