Kia Niro: DCT(Dual Clutch Transmission) System / Special service tools

Special Service Tools

Tool Name / Number	Illustration	Description
Engine support fixture (bar) 09200-3N000		Used for holding engine assembly when removing / installing transmission Used with the supporter (09200-2S000) and adapter (09200-2W000)
Engine support fixture (supporter) A: 09200-2S000 B: 09200-2S100 C: 09200-2S200		Used for holding engine assembly when removing / installing transmission Used with the bar (09200-3N000) and adapter (09200-2W000)
Engine support fixture (adapter) 09200-2W000		Used for holding engine assembly when removing / installing transmission Used with the bar (09200-3N000) and supporter (09200-2S000)
Oil seal installer A: 09430-C1190 (Installer) B: 09231-H1100 (Handle)		Used for installing differential oil seal
Inhibitor switch guide pin 0K948-E4000		Used for fixing "N" range when installing inhibitor switch
Clutch actuator remover 09430-G2100		Used for removing clutch actuator assembly
Dual clutch remover 09430-C1180		Used for removing dual clutch assembly
Dual clutch installer 09430-2A240		Used for installing dual clutch assembly
Clutch actuator adjustment jig 09430-F0100		Used for adjusting clutch actuator Used with the clutch actuator adjuster (09430-C1300)
Clutch actuator adjuster 09430-C1300		Used for adjusting clutch actuator Used with the clutch actuator adjustment jig (09430-F0100)

※ Engine support fixture special tool assembly drawing

Specifications Dual Clutch Transmission Transmission model D6KF1 Engine model Gasoline 1.6 Clutch Type ...

Troubleshooting Trouble symptom Probable cause Remedy Warning lamp ""E"" is illuminated(Driving is only possible ...

Kia Niro 2017 (DE HEV) Service Manual: Vanity Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the vanity lamp (A) using a flat-tip screwdriver. 3. Disconnect the vanity lamp connector (A). Bulb Replacement 1. ...

Kia Niro 2017 (DE HEV) Service Manual: Shift Cable Repair procedures
Removal • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...