Kia Niro: Clutch System / Reservoir Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Clutch System / Clutch System / Reservoir Repair procedures

Removal

1.	Turn the ignition switch OFF and disconnect the battery (-) terminal.

2.	Drain the hydraulic oil from the reservoir using a syringe.

Loosen the reservoir hose (A) and bolts (B) and then remove the reservoir.

Tightening torque :

3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)

Installation

1.	Install in the reverse order of removal.

Refill the specified lubricants in the reservoir and then perform the air bleeding using the GDS / KDS.

Specified lubricants : Brake fluid DOT 3

Quantity : Remove air from the hydraulic line and theninject hydraulic fluid to the reservoir so that it comes between the MAX and MIN levels of the reservoir.

After replacing the clutch disc , operate the followings in order using GDS / KDS equipment.

(1)	Removal of air from engine clutch hydraulic pressure line

•	When using vacuum pressurized hydraulic fluid injection device, change maximum vacuum pressure to 2.5 torr and injection pressure to 2.3-2.5 bar.

•	If it is impossible to inject hydraulic fluid using the above condition, be sure to remove air from the hydraulic line of the engine clutch at a temperature between 0 - 40°C.

Reservoir Components and components location

Components 1. Clutch disc 2. Clutch cover 3. Concentric slave cylinder 4. Hybrid motor assembly 5. Engine clutch actuator 6. Reservoir ...

DCT(Dual Clutch Transmission) System

...

Other information:

Kia Niro (DE HEV) Owners Manual: Stowing the rear seat belt
■ Outboard belt ■ Center belt If the center seat belt is not in use, always lock the latch plate into the buckle as above illustration. The rear seat belt buckles can be stowed in the pocket between the rear seatback and cushion when not in use. Insert the seat belt into the t ...

Kia Niro 2017 (DE HEV) Service Manual: Vapor Hose and Fuel Filler Cap Repair procedures
Inspection Vapor hose 1. Check all the clamps for tightness and the connections for leakage. 2. Visually check the vapor lines and hoses for cracks, leaks, loose connections, or deformation. Fuel filler cap 1. V ...