Kia Niro: Floor Carpet / Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the console assembly.

(Refer to Floor Console - "Floor Console Assembly")

2.

Remove the accelerator pedal.

(Refer to Engine Control System - "Accelerator Position Sensor (APS)")

3.

Remove the front seat assembly.

(Refer to Front Seat - "Front Seat Assembly")

4.

Remove the rear seat assembly.

(Refer to Rear Seat - "Rear Seat Assembly")

5.

Remove the cowl side trim.

(Refer to Interior Trim - "Cowl Side Trim")

6.

Remove the center pillar lower trim.

(Refer to Interior Trim - "Center Pillar Trim")

7.

Remove the luggage side trim.

(Refer to Interior Trim - "Luggage Side Trim")

8.

Remove the floor carpet assembly (A).

9.

Install in the reverse order of removal.

  

Replace any damaged clips

1. Floor carpet

Floor Carpet
...

Floor Console
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Seat Heater Switch Schematic diagrams
Circuit Diagram Front Seat Heater Switch Rear Seat Heater Switch ...

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Adjustment Inspect Glass Alignment 1. Inspect the step height between the roof panel (A) and the glass weatherstrip (B) and then adjust it if necessary. Alignment adjustment Standard value [mm(in.)] (1) Front edge : 0 mm (0 in.) ...

© 2016-2024 www.kniro.net