Kia Niro: Fuses And Relays / Relay Box (Engine Compartment) Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Fuses And Relays / Relay Box (Engine Compartment) Repair procedures

Inspection

1.	Disconnect the negative (-) battery terminal.

2.	Pull out the relay from the engine compartment relay block.

Power Relay (Type A)

Check for continuity between the terminals.

1.	After supplying power to between No. 85 and 86 power relay terminals, check that there is continuity between No. 30 and 87 terminals.

2.	After disconnecting power between No. 85 and 86 power relay terminals, check that there is no continuity between No. 30 and 87 terminals. Engine Room Relay Block

Power Relay (Type B)

Check for continuity between the terminals.

1.	After supplying power to between No. 85 and 86 power relay terminals, check that there is continuity between No. 30 and 87 terminals.

2.	After disconnecting power between No. 85 and 86 power relay terminals, check that there is no continuity between No. 30 and 87 terminals.

Metal Core PCB block

1.	Disconnect the negative (-) battery terminal.

2.	Disconnect the PCB block connector (A).

3.	Push the four hooks in the direction of the arrow and lift up the metal core PCB block (A).

4.	Remove the metal core PCB block by disconnecting the connectors (A).

Fuse

1.	Check that the fuse holders are loosely held and that the fuses are securely fixed by the holders.

2.	Check that each fuse circuit has the exact fuse capacity.

Check the fuses for any damage.

•	If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always identify the cause of the blown fuse and completely eliminate the problem before installing a new fuse.

Multi Fuse

(Multi Fuse A, B)

1.	Disconnect the negative (-) battery terminal.

2.	Remove the power cable terminal (A) after loosening the nut from the engine room fuse & relay box.

3.	Remove the multi fuse A (A) after pushing the hook.

4.	Remove the multi fuse B (A) after pushing the hook.

(Multi Fuse C)

1.	Remove the multi fuse A and multi fuse B.

2.	Remove the cooling & hose bracket (A) after loosening the mounting bolt.

3.	Remove the power cable terminal cap (A).

4.	Remove the power cable terminal (A) after loosening the bolt from the HPCU.

5.	Remove the engine room fuse & relay box power cable mounting clip (A).

6.	Remove the power cable terminal (A) after loosening the nut from the engine room fuse & relay box.

7.	Remove the multi fuse C (A) after pushing the hook.

•	The entire multi fuse (A) has to be replaced even if only one fuse is damaged.

•	When replacing it, refer to “the Engine compartment- component location” diagram to check fuse capacities and circuit arrangement.

•	Use the multi fuse of the exact fuse capacity for each circuit.

Relay Box (Engine Compartment) Components and components location

Component Location E/R Junction Block Circuit (E/R Junction Block) PCB Block Circuit (PCB Block) ...

Relay Box (Passenger Compartment) Components and components location

Component Location IGPM Circuit (IGPM) ICM (Integrated Circuit Module) Relay Box ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: SRS Control Module (SRSCM) Repair procedures
Removal 1. Remove the battery (-) cable. Disconnect the battery negative terminal and wait for at least thirty seconds before beginning work. ...

Kia Niro 2017 (DE HEV) Service Manual: General information
Lift And Support Points When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place additional weight in the luggage area before hoisting. When substat ...