Kia Niro: Interior Trim / Rear Pillar Trim Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Pillar Trim Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Separate the rear seat belt lower anchor (A) after loosening the bolt.

2.	Remove the rear pillar trim (A) after loosening the mounting bolts.

Install in the reverse order of removal.

Replace any damaged clips.

Rear Pillar Trim Components and components location

Component Location 1. Rear pillar trim ...

Mirror

...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Drive Motor Assembly Components and components location
Components 1. Dual clutch transmission assembly (DCT) 2. Hybrid drive motor assembly 3. Concentric slave cylinder 4. Engine clutch actuactor assembly ...

Kia Niro 2017 (DE HEV) Service Manual: Auto Defogging Sensor Description and operation
Description Installed on the windshield glass, the auto defogging sensor detects humidity to blow out wind for defogging to improve visibility and driver comfort. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by contr ...