Kia Niro: Rear Glass Defogger / Rear Glass Defogger Switch Repair procedures
| Inspection |
| 1. |
In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS). The diagnostic system (KDS/GDS) provides the following information.
|
| 2. |
Select the 'Car model' and the 'Body Control Module (BCM)' to be checked in order to check the vehicle with the tester. |
| 3. |
Select the 'Current Data' menu to search the current state of the input/output data.
|
| 4. |
To forcibly actuate the input value of the module to be checked, select option 'Actuation Test'
|
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the heater and A/C controll unit. (Refer to Heating, Ventilation, Air conditioning - "Heater & A/C Control Unit (Dual)") |
| Installation |
| 1. |
Install the heater and A/C control unit. |
| 2. |
Connect the negative (-) battery terminal. |
Rear Glass Defogger Printed Heater Repair procedures
Inspection
•
Wrap tin foil around the end of the voltmeter test lead to prevent
damagi ...
Other information:
Kia Niro (DE HEV) Owners Manual: TPMS (Tire Pressure Monitoring System) malfunction indicator
The TPMS malfunction indicator will illuminate after it blinks for approximately
one minute when there is a problem with the Tire Pressure Monitoring System.
We recommend that the system be checked by an authorized Kia dealer to determine
the cause of the problem.
✽ NOTICE
If there is a m ...
Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad plate [LH] (A) after loosening the screws.
...
