Kia Niro: Rear Door / Rear Door Trim Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the rear door delta inner cover (A) using a remover.

2.

Remove the rear door inside cap (A) and then loosen the screws.

3.

Remove the rear door pull cap (A) and then loosen the screws.

4.

Remove the rear door trim (A).

5.

Remove the rear door inside handle cage (A).

6.

Disconnect the power window switch connector (A).

7.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Make sure the door locks/unlocks and opens/closes properly.

Replace any damaged clips.

Rear Door Trim Components and components location
Component Location 1. Rear door trim ...

Rear Door Inside Handle Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components 1. Stabilizer bar 2. Rear sub frame 3. Rear upper arm 4. Rear shock absorber 5. Rear axle 6. Assist arm 7. Trailing arm 8. Coil spring ...

Kia Niro (DE HEV) Owners Manual: Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire ...

© 2016-2025 www.kniro.net