Kia Niro: Engine Control System / Rail Pressure Sensor (RPS) Troubleshooting

Rail Pressure Sensor (RPS) Repair procedures

Inspection 1. Connect the KDS/GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS during idle at various engine speeds. ...

Accelerator Position Sensor (APS) Specifications

Specification Accelerator Position Output Voltage (V) [Vref = 5V] APS1 APS2 C.T 0.7 - 0.8 ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with an L wrench (A). Tightening torque : 9.81 - 14.71 N·m (1.0 - 1.5 kgf·m, 7.2 - 10.8 lb·ft) ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization phase ...