Your vehicle is equipped with driver's and front passenger's and rear side passenger’s (if equipped) pre-tensioner seat belts (retractor pre-tensioner). The pre-tensioner seat belts can be activated, where the frontal collision is severe enough, together with the air bags.
When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. In certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body.
- Retractor Pretensioner
The purpose of the retractor pretensioner is to make sure that the shoulder belts fit in tightly against the occupant's upper body in certain frontal collisions.
If the system senses excessive tension on the driver or passenger's seat belt when the pre-tensioner system activates, the load limiter inside the retractor pre-tensioner will release some of the pressure on the affected seat belt. (if equipped)
WARNING
For your safety, be sure that the belt webbing is not loose or twisted and always sit properly on your seat.
The seat belt pre-tensioner system consists mainly of the following components. Their locations are shown in the illustration:
(1) SRS air bag warning light
(2) Retractor pre-tensioner assembly
(3) SRS control module
WARNING
To obtain maximum benefit from a pre-tensioner seat belt:
1. The seatbelt must be worn correctly and adjusted to the proper position. Please read and follow all of the important information and precautions about your vehicle’s occupant safety features – including seat belts and air bags – that are provided in this manual.
2. Be sure you and your passengers always wear seat belts properly.
✽ NOTICE
CAUTION
If the pre-tensioner seat belt is not working properly, the SRS air bag warning light will illuminate even if there is no malfunction of the SRS air bag. If the SRS air bag warning light does not illuminate when the ignition key is turned to ON, or if it remains illuminated after illuminating for approximately 6 seconds, or if it illuminates while the vehicle is being driven, we recommend that the system be inspected by an authorized Kia dealer.
WARNING
CAUTION
Body work on the front area of the vehicle may damage the pretensioner seat belt system.
Therefore, we recommend that the system be serviced by an authorized Kia dealer.
Kia Niro 2017 (DE HEV) Service Manual: Ignition Coil Electrical and electronic specifications
Specification
Item
Specification
Engine Time (RPM)
1000
2000
3000
4000
5000
6000
7000
Dwell Time (ms)
5.18
4.19
...
Kia Niro 2017 (DE HEV) Service Manual: Rear Shock Absorber Repair procedures
Removal
1.
Disconnect the battery negative cable.
2.
Remove the wheel nuts and tire.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
...