Kia Niro: High Voltage Battery Control System / Pre-Charge Resistor Repair procedures

Removal

•	Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.

•	Be sure to shut off the high voltage before doing any work related with the high voltage system(Refer to "High Voltage Shut-off Procedure"). Failure to follow the safety instructions may result in serious electrical injuries.

1.	Shut off the high voltage circuit. (Refer to Hybrid Control System - “High Voltage Shutoff Procedure”)

2.	Remove the power relay assembly. (Refer to High Voltage Battery System - "Power Relay Assembly (PRA)")

3.	Insert a screwdriver or an awl (B) into the hole (A).

4.	Lift the pre-charge resistor (D) in the direction of arrow (C).

5.	Remove the pre-charge resistor (A).

Inspection

1.	Remove the pre-charge resistor. (Refer to High Voltage Battery Control System - "Pre-Charge Resistor")

Check for continuity between the terminals using an ohmmeter.

Specification : 40Ω [20 °C (68 °F)]

Installation

•	Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.

•	Be sure to shut off the high voltage before doing any work related with the high voltage system(Refer to "High Voltage Shut-off Procedure"). Failure to follow the safety instructions may result in serious electrical injuries.

1.	Install the pre-charge resistor in the reverse order of removal.

Circuit Diagram [B03-C] (Relay Control) [B03-S] (Relay Control) ...

Specification Battery Current Sensor Item Output Voltage (V) Max. Current (A) -300 (Charge) 0.5 0 ...

Kia Niro 2017 (DE HEV) Service Manual: CVVT Oil Control Valve (OCV) Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specificat ...

Kia Niro 2017 (DE HEV) Service Manual: Purge Control Solenoid Valve (PCSV) Description and operation
Description Installed on the intake manifold, the Purge Control Solenoid Valve (PCSV) controls the evaporative purge between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fu ...