Kia Niro: Audio / Multimedia Jack Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Audio / Multimedia Jack Repair procedures

Removal

Multimedia Jack

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Disconnect the negative (-) battery terminal.

2.	Remove the gear knob & boots (A) pull both of it up.

3.	Remove the console upper cover (A) by using a remover.

4.	Disconnect the console upper cover connector (A).

5.	Remove the console tray (A) after loosening the mounting screws.

6.	Disconnect the console tray connectors (A).

7.	Remove the multimedia jack (A) after releasing the fixed hooks.

USB Charger (Console Armrest)

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Disconnect the negative (-) battery terminal.

2.	Remove the floor console assembly. (Refer to Body - "Floor Console Assembly")

3.	Disconnect the USB charger connector (A).

4.	Remove the USB charger (A) after releasing the fixed hooks.

Installation

Multimedia Jack

1.	Install the multimedia jack.

2.	Connect the console tray connectors.

3.	Install the console tray.

4.	Connect the console upper cover connectors.

5.	Install the console upper cover.

6.	Install the gear knob & boots.

Connect the negative (-) battery terminal.

•	Make sure the multimedia connector and the console front tray connectors are plugged in properly.

•	Check the audio system for normal operation.

USB Charger (Console Armrest)

1.	Install the USB charger.

2.	Connect the USB charger connector.

3.	Install the floor console assembly.

Connect the negative (-) battery terminal.

Make sure that the cables and connectors are plugged in properly.

Multimedia Jack Description and operation

Description The multimedia jack on the console upper cover is for customers who like to listen to external portable music players like the MP3 etc., through the vehicle's sound sy ...

AC Inverter System

...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rheostat Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad plate [LH] (A) after loosening the screws. ...

Kia Niro 2017 (DE HEV) Service Manual: Specifications
Specifications Items Specification Hood Type Rear hinged, gas lifter type Front Door Construction Front hinged, frame door construction Regulator system ...