Kia Niro: Integrated Memory System (IMS) / Memory power seat switch Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the driver front door trim. (Refer to Body - "Front Door Trim") |
| 3. |
Remove the memory power seat switch (A) after loosening the mounting screws.
|
| Installation |
| 1. |
Install the memory power seat switch (IMS). |
| 2. |
Install the driver front door trim. |
| 3. |
Connect the negative (-) battery terminal. |
| Inspection |
| 1. |
Remove the memory power seat connector.
|
| 2. |
When each switch is pressed, check the electricity flow between memory power seat switch connector and grounding, and if the electricity does not match the specification, replace the switch.
|
Memory power seat switch Components and components location
Components
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Front Seat Shield Outer Cover Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pie ...
Kia Niro 2017 (DE HEV) Service Manual: Front Impact Sensor (FIS) Description and operation
Description
•
The front impact sensor (FIS) is installed in the Front End Module (FEM).
They are remote sensors that detect acceleration due to a collision at its
mounting location. The primary purpose of the Front Impact Sensor (FIS)
is to provide an indica ...
