Kia Niro: Light bulbs / License plate lamp bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
3. Remove the bulb from bulb-socket by pulling it out.
4. Insert a new bulb by inserting it into the bulb-socket.
5. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
6. Align the lens cover tabs with the lamp housing notches and snap the lens into place.
High mounted stop lamp bulb replacement
If the high mounted stop lamp (LED) does not operate, we recommend that you checked
an authorized Kia dealer. ...
Side repeater lamp (LED type) bulb replacement
If the side repeater lamp (LED type) does not operate, we recommend that you
checked an authorized Kia dealer. ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: SRS Control Module (SRSCM) Description and operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module)
is to determine between an event that warrants restraint system deployment and an
event that does not. The SRSCM must decide whether to deploy the restraint system
or not. After determinin ...
Kia Niro (DE HEV) Owners Manual: Driver's Attention
The driver must be cautious in the below situations, because the system may not
detect other vehicles or objects in certain circumstances.
- The vehicle drives on a curved road or through a tollgate.
- The sensor is polluted with rain, snow, mud, etc.
- The rear bumper, in which the sensor is l ...
