Kia Niro: Child restraint system (CRS) / ISOFIX anchorage and toptether anchorage (ISOFIX anchorage system) for children

Kia Niro (DE HEV) Owners Manual / Safety features of your vehicle / Child restraint system (CRS) / ISOFIX anchorage and toptether anchorage (ISOFIX anchorage system) for children

The ISOFIX system holds a Child Restraint System during driving and in an accident. This system is designed to make installation of the Child Restraint System easier and reduce the possibility of improperly installing your Child Restraint System. The ISOFIX system uses anchors in the vehicle and attachments on the Child Restraint System. The ISOFIX system eliminates the need to use seat belts to secure the Child Restraint System to the rear seats.

ISOFIX anchorages are metal bars built into the vehicle. There are two lower anchors for each ISOFIX seating position that will accommodate a Child Restraint System with lower attachments.

To use the ISOFIX system in your vehicle, you must have a Child Restraint System with ISOFIX attachments.

The Child Restraint System manufacturer will provide you with instructions on how to use the Child Restraint System with its attachments for the ISOFIX anchorages.

ISOFIX anchorages have been provided in the left and right outboard rear seating positions. Their locations are shown in the illustration.

WARNING

Do not attempt to install a Child Restraint System using ISOFIX anchorages in the rear center seating position. There are no ISOFIX anchorages provided for this seat. Using the outboard seat anchorages, for the CRS installation on the rear center seating position, can damage the anchorages.

■ Type A

■ Type B

ISOFIX anchorages are located between the seatback and the seat cushion of the rear seat left and right outboard seating positions, indicated by the symbols.

❈ (1) : ISOFIX Anchor Position Indicator (Type A- ,Type B- )

(2) : ISOFIX Anchor

Installing a Child Restraint System (CRS)
WARNING Before installing your Child Restraint System always: Read and follow the instructions provided by the manufacturer of the Child Restraint System. Failure to follow all warnings and instr ...

Securing a Child Restraint System with the “ISOFIX Anchorage System”
To install an i-Size or ISOFIX-compatible Child Restraint System in either of the rear outboard seating positions: 1. Move the seat belt buckle away from the ISOFIX anchorages. 2. Move any other o ...

Other information:

Kia Niro (DE HEV) Owners Manual: Headlamp (High/Low beam) bulb replacement
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the ...

Kia Niro 2017 (DE HEV) Service Manual: Main Crash Pad Assembly Components and components location
Component Location 1. Crash pad main lower panel ...

© 2016-2024 www.kniro.net