Kia Niro: Blower / Intake Actuator Description and operation

Description

Located in the blower unit, the intake actuator regulates the intake door based on the signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

Intake Actuator Components and components location
Components Location 1. Intake actuator ...

Intake Actuator Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the intake actuator connector. 3. Verify that the intak ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Operation 1. Cooling Fan 2. Cooling duct (inlet) 3. Outlet cooling duct (outlet) ...

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components 1. Power Cable [Engine Room Fuse & Relay Box, HPCU ↔ Auxiliary 12V Battery & High Voltage Battery System Assembly] 2. Power Cable [HPCU(Inverter) ↔ Hybrid Drive Motor] 3. Power Cable [HPCU(inverter) ↔ HSG & El ...

© 2016-2025 www.kniro.net