Kia Niro: Electronic stability control (ESC) / Indicator light
When ignition switch is turned to ON, the indicator light illuminates, then goes off if the ESC system is operating normally.
The ESC indicator light blinks whenever ESC is operating or illuminates when ESC fails to operate.
ESC OFF indicator light comes on when the ESC is turned off with the button.
CAUTION
Driving with varying tire or wheel sizes may cause the ESC system to malfunction. When replacing tires, make sure they are the same size as your original tires.
WARNING
The Electronic Stability Control system is only a driving aid; use precautions for safe driving by slowing down on curved, snowy, or icy roads. Drive slowly and don’t attempt to accelerate whenever the ESC indicator light is blinking, or when the road surface is slippery.
ESC operation off
ESC OFF state
This car has 2 kinds of ESC off states.
If the engine stops when ESC is off, ESC remains off. Upon restarting the engine,
the ESC will automatically turn on again.
“Traction Con ...
ESC OFF usage
When driving
ESC should be turned on for daily driving whenever possible.
To turn ESC off while driving, press the ESC OFF button while driving on
a flat road surface.
WARNING
Never press ...
Other information:
Kia Niro (DE HEV) Owners Manual: To set cruise control speed
1. Press the CRUISE button, to turn the system on. The CRUISE indicator in the
instrument cluster will illuminate.
2. Accelerate to the desired speed. The smart cruise control speed can be set
as follows:
30 km/h (20mph) ~ 180 km/h (110 mph): when there is no vehicle in front
10 km/h (6 ...
Kia Niro 2017 (DE HEV) Service Manual: BMS ECU Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...
