Kia Niro: Immobilizer System / Immobilizer Control Unit Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") |
| 3. |
Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a bolt.
|
| Installation |
| 1. |
Install the immobilizer control unit after connecting the unit connector. |
| 2. |
Install the main crash pad assembly. |
| 3. |
Connect the negative (-) battery terminal. |
Repair procedures
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective PCM(ECM) or when
providing additional keys to the vehicle owner. ...
Antenna Coil Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel&quo ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Battery Temperature Sensor Schematic diagrams
Circuit Diagram
Battery Temperature Sensor (B06-1)
Battery Temperature Sensor (B06-4)
Air Inlet Temperature Sensor (B06)
...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Adjustment
Glass Adjustment
Check the glass run channel for damage or deterioration, and replace
it if necessary.
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door ...
