Kia Niro: Crankcase Emission Control System / Fuel Tank Air Filter Repair procedures

Removal
1.

Turn ignition switch OFF and disconnect the negative (-) battery terminal.

2.

Remove the filler-neck assembly.

(Refer to Engine Control / Fuel System - "Filler-Neck Assembly")

3.

Disconnect the ventilation hoses(A).

4.

Remove the fuel tank air filter (C) after loosening the mounting bolts (B).

Installation
1.

Install in the reverse order of removal.

Fuel Filler Cap Description and operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler ...

Exhaust Emission Control System
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Camshaft Position Sensor (CMPS) Troubleshooting
Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition timing by using these signals. Generally, the CKPS signal is used to detect the piston position whe ...

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components 1. Front seat belt retractor 2. Height adjuster 3. Rear seat belt retractor [side] 4. Rear seat belt retractor [center] ...

© 2016-2024 www.kniro.net