Kia Niro: Fuel Delivery System / Fuel Pump Control Module (FPCM) Repair procedures
| Removal |
| 1. |
Switch "OFF" the ignition and disconnect the negative (-) battery terminal. |
| 2. |
Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly") |
| 3. |
Fuel pump service cover (A).
|
| 4. |
Remove the fuel pump control module connector (A). |
| 5. |
Disconnect the fuel pressure sensor connector (B). |
| 6. |
Disconnect the fuel feed tube quick-connector.(C).
|
| 7. |
Remove the fuel pump plate cover (B) by using the special service tool (A) [SST NO.:09310-B8100].
|
| 8. |
Remove the fuel pump (A).
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
| Inspection |
| 1. |
Connect the KDS/GDS to the vehicle's data link connector (DLC). |
| 2. |
Check for DTCs and repair any according to the DTC guide. |
| 3. |
Check the power supply voltage provided to the fuel pressure sensor (FPS).
|
| 4. |
Check the voltage provided to the fuel pressure sensor (FPS) at idle.
|
| 5. |
Check the fuel pressure in the low fuel line. (Refer to Fuel Delivery System - "Fuel Pressure Test") |
Fuel Pump Control Module (FPCM) Schematic diagrams
Circuit Diagram
Terminal Information
Terminal Illustration
Terminal Function
Pin No.
Description
...
Fuel Pressure Sensor (FPS) Specifications
Specification
Pressure [kPa (kgf/cm², psi)]
Output Voltage (V) [Vref = 5V]
50 (0.51, 7.3)
0.3
600 (6.12, 87.0)
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Front Door Module Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pie ...
Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Schematic diagrams
Circuit Diagram
Fail-Safe Mode
Item
Fail-Safe
Output Voltage (V)
12
If the fuel pressure sensor malfunctions, it enters fail safe mode. This
...
