Kia Niro: Auto Lighting Control System / Description and operation
| Description |
It's a system that uses illumination sensor to automatically turn ON the tail lamp and head lamp based on the change in surrounding environment's illumination condition. It activates when the vehicle enters/exits tunnel, or when the illumination condition in surrounding environment changes due to rain, snow, or fog. Precautions corresponding to the use of this system are as follows.
| 1. |
Do not add another device on top of this device. |
| 2. |
Be sure to switch to manual during poor visibility climate, such as fog, heavy rain, or cloudy weather. |
| 3. |
Illumination intensity in an actual vehicle is not always constant, and lamp ON/OFF time may very depending on the climate, season, and surrounding environment. |
| 4. |
Use this system only during sunrise and sunset period, and manually control lamp ON/OFF for general conditions. |
| 5. |
Error may occur if light block coating that may change interior illumination is applied. |
Schematic diagrams
Circuit Diagram
...
Auto Light Sensor Repair procedures
Inspection
Check if the auto light control operates like a timing chart shown below. Tail
lamp output and head lamp (Low) output is controlled based on the auto light sensor's
inp ...
Other information:
Kia Niro (DE HEV) Owners Manual: Emergency Commodity
There are some emergency commodities in the vehicle to help you respond to the
emergency situation.
Fire extinguisher
If there is small fire and you know how to use the fire extinguisher, take the
following steps carefully.
1.Pull the pin at the top of the extinguisher that keeps the handle f ...
Kia Niro 2017 (DE HEV) Service Manual: Electric EGR Control Valve Repair procedures
Inspection
[Motor]
1.
Switch "OFF" the ignition.
2.
Disconnect the EEGR valve connector.
3.
Check if the EEGR valve is stuck by foreign material.
4.
Measure the resistance between 1 a ...
