Kia Niro: Crash Pad / Crash Pad Garnish [RH] Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Garnish [RH] Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Remove the crash pad side cover [RH] (A) by using a remover.

2.	Remove the crash pad plate [RH] (A) by using a remover.

3.	Disconnect the start/stop button connector (A).

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Replace any damaged clips.

Crash Pad Garnish [RH] Components and components location

Component Location 1. Crash pad plate assembly [RH] ...

Crash Pad Lower Panel Components and components location

Component Location 1. Crash pad lower panel ...

Other information:

Kia Niro (DE HEV) Owners Manual: Trailer brakes
If your trailer is equipped with a braking system, make sure it conforms to your country’s regulations and that it is properly installed and operating correctly. If your trailer weight exceeds the maximum allowed weight without trailer brakes, then the trailer will also require its own brakes ...

Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Trouble Shooting Ignition System Symptom Suspect area Remedy Vehicle indicates Ready in dash, but engine will not run when requested by the HPCU (HEV module). Ignition coil Inspect ignition coil, or repl ...