Kia Niro: Hybrid Control System / Components and components location
| Components Location |
|
1. Hybrid Power Control Unit (HPCU) 2. Hybrid Control Unit (HCU) |
3. Brake Switch 4. DC Fuse |
HPCU includes the HCU (Hybrid Control Unit), Inverters (for Drive Motor, HSG and Electric A/C Compressor), MCU (Motor Control Unit) and LDC (Low DC / DC Converter). |
For the location of the other control modules, refer to the relevant group. |
|
1. Hybrid Power Control Unit (HPCU) 2. Hybrid Control Unit (HCU) |
3. Brake Switch |
|
|
|
|
4. DC Fuse |
|
|
|
Description and operation
Description
The HCU (Hybrid Control Unit) controls whole hybrid systems and is connected
with each control modules (ECM, TCM, MCU, BMS ECU etc.) by CAN interface. In addition
this sys ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Switch "OFF" the ignition.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the specific ...
Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Engine Overheat Troubleshooting
Inspection
Remedy
Visual inspection
Inspect for shortage of coolant in reservoir tank .
Reinspect after replenishing coolant.
Inspect for coolant pollution after remo ...
