Kia Niro: Hybrid Control System / Brake Switch Description and operation
| Description |
Installed on the brake pedal and linked with the HCU and the stop lamp, the brake switch sensors the status of the brake pedal (Release/Depress) and informs the HCU.
Brake Switch Specifications
Specification
Item
Brake pedal release
Brake pedal depressed
Switch 1
Max. 0.5V
Battery Voltage
...
Brake Switch Schematic diagrams
Circuit Diagram
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
General Inspection
Before and after servicing the EPS system, perform the troubleshooting and
test procedure as follows.
Compare the system condition with normal condition in the table below and
if abnormal symptom is detected, perform necessary remedy and inspe ...
Kia Niro 2017 (DE HEV) Service Manual: Specifications
Specifications
Ignition System
Ignition Coil
Item
Specification
Engine Time (RPM)
1000
2000
3000
4000
5000
6000
7000
Dwell Time ...
