Kia Niro: Blower / Blower Unit Components and components location

Component Location

1. Blower unit assembly

Components

1. Blower Intake Seal
2. Intake Duct Case [Upper]
3. Intake Door Assembly
4. Intake Duct Case [Lower]
5. Air Filter Cover
6. Intake Actuator

7. Air Filter
8. Anti Noise Pad
9. Blower Case [Upper]
10. Cluster Ionizer
11. Blower Motor assembly

Replacement When prying with a flat-tip screwdriver or a prying trim tool, wrap a protective tape around the rela ...

Kia Niro 2017 (DE HEV) Service Manual: Immobilizer Control Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3. Disconnect the connector of the immobilizer unit and then remov ...

Kia Niro 2017 (DE HEV) Service Manual: Electric EGR Control Valve Repair procedures
Inspection [Motor] 1. Switch "OFF" the ignition. 2. Disconnect the EEGR valve connector. 3. Check if the EEGR valve is stuck by foreign material. 4. Measure the resistance between 1 a ...