Kia Niro: Blower / Blower Motor Repair procedures

Inspection
1.

Operate the heater controls at IGN2 to ensure that the motor is running.

1. Battery (+)
2. Input signal
3. ?
4. Ground

2.

If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.

3.

Replace the blower motor if it is proved that there is a problem with it.

Replacement
1.

Disconnect the negative (-) battery terminal.

2.

Remove the crash pad under cover (A) by pushing the locking pin.

3.

Disconnect the blower motor connector (A) and then remove the blower motor (B) after loosening the screws.

4.

Install in the reverse order of removal.

Blower Unit Repair procedures
Replacement    When prying with a flat-tip screwdriver or a prying trim tool, wrap a protective tape around the rela ...

Climate Control Air Filter Description and operation
Description Located in the blower unit, the climate control air filter captures foreign materials and odor. The particle filter performs a role of an odor filter as well as a conventio ...

Other information:

Kia Niro (DE HEV) Owners Manual: Safety chains
You should always attach chains between your vehicle and your trailer. Cross the safety chains under the tongue of the trailer so that the tongue will not drop to the road if it becomes separated from the hitch. Instructions about safety chains may be provided by the hitch manufacturer or by ...

Kia Niro (DE HEV) Owners Manual: Smart key system operation
With a smart key, you can lock or unlock a door (and tailgate) and even start the engine without inserting the key. The functions of the buttons on a smart key are similar to the remote keyless entry. (Refer to the “Remote keyless entry” in this chapter.) Carrying the smart key, you may ...

© 2016-2025 www.kniro.net