Kia Niro: Lighting / Battery saver function
- The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the parking lights when the driver removes the ignition key and opens the driver-side door.
- With this feature, the parking lights will turn off automatically if the
driver parks on the side of the road at night.
If necessary, to keep the lights on when the ignition key is removed, perform the following:
1) Open the driver-side door.
2) Turn the parking lights OFF and ON again using the light switch on the steering column.
CAUTION
If the driver gets out of the vehicle through other doors (except driver's door), the battery saver function does not operate. Therefore, It causes the battery to be discharged. In this case, make sure to turn off the lamp before getting out of the vehicle.
Lighting
...
Headlight escort function
If you turn the ignition switch to the ACC or OFF position with the headlights
ON, the headlights remain on for about 5 minutes. However, if the driver's door
is opened and closed, the headlig ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Concentric Slave Cylinder Assembly Repair procedures
Removal
1.
Remove the hybrid motor assembly.
(Refer to Hybrid Motor System - "Hybrid Motor Assembly")
2.
Remove the engine clutch actuator.
(Engine Clutch System - "Engine Clutch Actuator")
3.
...
Kia Niro 2017 (DE HEV) Service Manual: Inspection mode procedures
Procedure for entering engine
forced activation mode
If the engine needs to be run constantly while the vehicle is stopped to inspect
emission gas or perform maintenance on the vehicle, follow the below procedure to
enter forced engine activation mode.
1.
Place ...
