Kia Niro: Interior features / Wireless smart phone charging system
A wireless smart phone charging system located in front of the center console.
Firmly close all doors, and turn the ignition to ACC or IGN ON. To start wireless charging, place the smart phone equipped with wireless charging function on the wireless charging pad.
For best wireless charging results, place the smart phone on the center of the charging pad.
The wireless charging system is designed for one smart phone equipped with QI per single usage only. Please refer to the smart phone accessory cover or the smart phone manufacturer homepage to check whether your smart phone supports QI function.
AC inverter
The AC inverter supplies 220V/200W electric power to operate electric accessories
or equipment.
If you wish to use the AC inverter, open up the AC inverter cover and connect
a plug to it. The A ...
Wireless smart phone charging
1. Remove any object on the smart phone charging pad including the smart key.
If there is any foreign object on the pad other than a smart phone, the wireless
charging function may not operate pro ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform
This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position
Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition timing
by using these signals.
Generally, the CKPS signal is used to detect the piston position whe ...
Kia Niro (DE HEV) Owners Manual: Outside (fresh) air position
With the outside (fresh) air position selected, air enters the vehicle from outside
and is heated or cooled according to the function selected.
✽ NOTICE
Prolonged operation of the heater in the recirculated air position (without
air conditioning selected) may cause fogging of the windshiel ...
