Kia Niro: Driving your vehicle / Speed limit control system
You can set the speed limit when you do not want to drive over a specific speed.
If you drive over the preset speed limit, the warning system operates (set speed limit will blink and chime will sound) until the vehicle speed returns within the speed limit.
✽ NOTICE
While speed limit control is in operation, the cruise control system cannot be activated.
Vehicle recognition
Some vehicles ahead in your lane cannot be recognized by the sensor as follows:
- Narrow vehicles such as motorcycles or bicycles
- Vehicles offset to one side
- Slow-moving vehicles or suddendec ...
To set speed limit
1. Press the CRUISE & SPEED LIMIT MODE ( ) button twice on the steering wheel,
to turn the system on.
The speed limit indicator light will illuminate.
2. Move the lever down (to SET-). ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Power Relay Assembly (PRA) Description and operation
Description
The Power Relay Assembly (PRA) consists of the positive and negative main relays,
pre-charge relay, pre-charge resistor and battery current sensor. It is located
inside the battery pack assembly and controls the high voltage power circuit between
the high voltage batte ...
Kia Niro 2017 (DE HEV) Service Manual: Hood Insulator Pad Repair procedures
Replacement
1.
Using a clip remover, detach the clips, and remove the hood insulator
pad (A).
Be careful not to damage the hood and body.
...
