Kia Niro: Towing / Removable towing hook
■ Front
■ Rear
1. Open the tailgate, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the upper (front) / lower (rear) part of the cover on the bumper.
3. Install the towing hook by turning it clockwise into the hole until it is fully secured.
4. Remove the towing hook and install the cover after use.
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to prevent damage ...
Emergency towing
■ Front
■ Rear
If towing is necessary, we recommend you to have it done by an authorized Kia
dealer or a commercial tow truck service.
If towing service is not available in an emergency, ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Drive Belt Repair procedures
Removal
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
Remove the drive belt.
(1)
Using the wrench, turning the mechanical tensioner (A) c ...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Removal
1.
Disconnect the battery negative terminal, and wait for at least three
minutes before beginning to work.
2.
Remove the front seat belt anchor (A).
3.
Remove the door scurff trim.
(Refer to Body ...
