Kia Niro: Air Conditioning System / Refrigerant Line Repair procedures

Replacement
1.

Discharge refrigerant from refrigeration system.

2.

Replace faulty tube or hose.

  

Cap the open fittings immediately to keep moisture or dirt out of the system.

3.

Tighten joint of bolt or nut to specified torque.

  

Connections should not be torqued tighter than the specification.

Tightening torque
N·m
kgf·m
lb·ft
Condenser - Discharge hose
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7
Condenser - Liquid tube
Compressor - Discharge hose
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7
Compressor - Suction hose
Expansion valve - Evaporator
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7

4.

Evacuate air in refrigeration system and charge system with refrigerant.

Specified amount : 650 ± 25 g (22.9 ± 0.88 oz.)

5.

Inspect for leakage of refrigerant.

Using a gas leak detector, check for leakage of refrigerant.

6.

Inspect A/C operation.

Refrigerant Line Components and components location
Components Location 1. Refrigerant line assembly ...

Compressor Components and components location
Components Location 1. Electric A/C Compressor Components 1. Electric A/C Compressor bracket 2. Electric A/C Co ...

Other information:

Kia Niro (DE HEV) Owners Manual: Operating conditions
Go to the User Settings Mode → Driving Assist → Rear Collision Warning and select "Rear Cross Traffic Alert" on the LCD display. The system will turn on and stand by to be activated. Select Rear cross traffic alert again, to turn the system off. If the vehicle is turned of ...

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Drive Motor Assembly Components and components location
Components 1. Dual clutch transmission assembly (DCT) 2. Hybrid drive motor assembly 3. Concentric slave cylinder 4. Engine clutch actuactor assembly ...

© 2016-2024 www.kniro.net