Kia Niro: Airbag Module / Passenger Airbag (PAB) Module Description and operation
| Description |
The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury. |
Driver Airbag (DAB) Module and Clock Spring Repair procedures
Inspection
Air bag module
If any improper parts are found during the following inspection, replace the
airbag module with a new one.
...
Passenger Airbag (PAB) Module Components and components location
Components
1. Passenger Airbag (PAB)
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
The HCU (Hybrid Control Unit) controls the overall hybrid systems and is connected
with each of the control modules (ECM, TCM, MCU, BMS, ECU, etc.) via CAN. The hybrid
system is controlled based on the brake switch signals.
...
Kia Niro 2017 (DE HEV) Service Manual: Ignition Coil Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the battery negative (-) terminal.
2.
Remove the engine cover.
3.
Disconnect the ignition coil connector (A).
4.
Remove the ignition ...
