Kia Niro: Hybrid Control System / Hybrid Power Control Unit (HPCU) Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Service Highlight / Hybrid Control System / Hybrid Power Control Unit (HPCU) Components and components location

Components

1. Hybrid Control Unit(HCU) [HPCU]
2. Inverter [HPCU]
3. Low Voltage DC/DC Converter (LDC) [HPCU]
4. High voltage connector (↔ High voltage battery system assembly)
5. High voltage connector (↔ Hybrid drive motor assembly)

6. High voltage connector (↔ HSG&Electric A/C compressor)
7. Low Voltage DC/DC Converter (LDC) supply output terminal (+)
8. DC Fuse (30A)
9. Low Voltage DC/DC Converter (LDC) ground terminal (-)
10. High voltage connector (↔ HSG&Electric A/C compressor)

Hybrid Power Control Unit (HPCU) Specifications

Specification Hybrid Power Control Unit (HPCU) Item Specification Operating Voltage (V) 204 - 275.2 Operating F ...

Hybrid Power Control Unit (HPCU) Description and operation

Description The Hybrid Power Control Unit (HPCU) is an integrated power conversion unit which consists of the two inverters, LDC, and HCU. ...

Other information:

Kia Niro (DE HEV) Owners Manual: Operating conditions
The indicator on the switch will illuminate when the Blind spot detection system switch is pressed with the ignition switch ON. If the vehicle speed exceeds 30 km/h (18.6 mph), the system will activate. If you press the switch again, the switch indicator and system will be turned off. If t ...

Kia Niro 2017 (DE HEV) Service Manual: Front Wiper Motor Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius (A) of wiper arm. 3. Remove the co ...