Kia Niro: Front Seat Belt / Height Adjuster Repair procedures

Replacement
1.

Remove the front seat belt upper anchor.

(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")

2.

After loosening the mounting bolts, remove the height adjuster (A).

Tightening torque :

39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Height Adjuster Components and components location
Component Location 1. Height Adjuster ...

Front Seat Belt Buckle Components and components location
Component Location 1. Front seat belt buckle ...

Other information:

Kia Niro (DE HEV) Owners Manual: Larger children
Children who are too large for child restraint systems should always occupy the rear seat and use the available lap/shoulder belts. The lap portion should be fastened and snugged on the hips and as low as possible. Check if the belt fits periodically. A child's squirming could put the belt ...

Kia Niro 2017 (DE HEV) Service Manual: Auto Defogging Actuator Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the auto defogging sensor connector. 3. Connect the power (+) terminal to mode actuator connector terminal 3, and ground the negative (-) terminal to t ...

© 2016-2024 www.kniro.net